Call: 604.966.8625

When it comes to mold in your home, traditional remediation is sometimes essential, you've got to tear out the wet stuff! But, that's only part of the solution. Think of it like removing a cancerous tumor : it eliminates the visible problem, but it doesn’t always address the hidden threats. That’s where All Clear Solutions comes in—our sanitization/biodecontamination service is like chemotherapy for your home . Traditional mold remediation removes the mold you can see, often

Mold, Moisture, and Healthier Small Homes Mold is part of the natural environment, but when it takes hold inside your home, it can affect indoor air quality, comfort, and peace of mind. At All Clear Mold & Pathogen Solutions we help homeowners understand why  mold forms and how to keep it from coming back. Why Mold Keeps Coming Back Mold spores exist in every indoor environment, even in newly built homes. Mold becomes a problem when moisture is present long enough for spores

To treat only the wet and moldy area, test within that contained area, then report the home safe is not only disingenuous, but dangerous.

What you can expect from us when you reach out for help. There is a general hard and fast (and obvious) rule we have and that is: If you...

Hint: the spores didn't ride in with the water that entered your home. A guest blog from Mike Adams. The term “mold load” has been an...

Keeping fungus in check essential to supporting a healthy environment Mold is part of life and a common issue in Greater Vancouver (Lower...

Your home will have more mold tomorrow than it does today! When people talk about mold problems, they often focus on what they can see. But in most homes, the real issue isn’t visible mold — it’s mold load . Mold load refers to the total amount of mold spores and microbial particles present in your home’s air and on its surfaces.  Mold spores are microscopic and exist naturally everywhere. A small amount is normal. Problems begin when conditions allow mold to grow, release sp

Mold information on the internet can be complicated, and quite frankly, very misleading. Here are answers to some of the most common...

Simple ways to get the most out of the All Clear treatment for cars, truck, RVs, campers and boats. The vehicle and keys will need to be...

And Why It’s Not Just Bad Luck Many people assume mold problems are isolated incidents caused by a leak or flood. But the reality is bigger than that. The way we design, build, and live in our homes has fundamentally changed — and those changes have quietly increased mold exposure for nearly all of us. Here are several key reasons why mold is becoming more common in modern homes. 1. Homes Can’t “Breathe” the Way They Used To In cold climates, especially during heating season,

Your 'home away from home' may have some uninvited occupants you'll want to evict right away. Some are obvious, some not so much. Any...

CIRS occurs when there is widespread inflammation caused by a bio-toxin (often mold) in the body that leads to immune system dysfunction. A guest blog by Mike Adams. “Mold illness” is often described as a subcategory of Chronic Inflammatory Response Syndrome (CIRS) , but mold isn’t the only trigger. This same inflammatory response can be caused by exposure to other biotoxins, including Lyme disease . One healthcare practitioner once told me something that stuck: If you have L

Simple ways to get the most out of the All Clear treatment.

Although you may not be able to eliminate every stress or every toxin, you can lower the overall toxin load.

The short answer is practically all molds in elevated amounts can be dangerous. A guest blog by Mike Adams. We often encounter customers...

The whole what, where, how, why (and perhaps why not) on the subject. A guest blog by Mike Adams. We are often asked about mold testing...

Do you know the answer? What follows is a straightforward answer to this simple question. A guest blog by Mike Adams. Mold is a fungus...

What is Lyme disease? A guest blog by Mike Adams. A brief definition straight from the internet: Lyme disease, also known as Lyme...

Many people assume that a brand-new home is immune to household problems like mold. In reality, even newly constructed homes can develop mold issues during or after construction — sometimes hidden behind walls, ceilings, or in basements. The good news? Mold can be prevented proactively , and All Clear Mold & Pathogen Solutions specializes in keeping your home safe from the start. Why Mold Can Occur in New Homes Basement and Foundation Issues Mold often starts in the basement.

Mold in Rental Homes in BC — What Landlords and Tenants Need to Know Mold in rental homes can be stressful, but knowing the rules and responsibilities in British Columbia  makes it easier to handle. Both landlords and tenants have roles to play to keep homes safe and healthy — and acting quickly is key. Landlord Responsibilities Under BC’s Residential Tenancy Act , landlords must provide rental units that are safe, healthy, and livable . This includes addressing leaks, water